E-Mu MORPHEUS Operation Manual Download Page 205

Page: 205 / 269

Chapter 11: Reference Section

195

Z-PLANE FILTER DESCRIPTIONS

F116

Bel>Crs>Bel

Morph:

Sweeps from flat to dissonance.

Freq. Tracking:

Provides key tracking to fix dissonant partials.

Transform 2:

Increases bell-like effect. Makes the sound brighter

and louder.

Comments:

Low velocities on Transform 2 reveals a hint of bells

when Morphing. Higher Transform 2 values create a more bell-like
and dissonant sound.

F117

Chrs>Flng1

Morph:

Sweeps to a flange effect.

Freq. Tracking:

Provides key tracking to enhance flange effect.

Transform 2:

Makes brighter, increases volume.

Comments:

Degree of flanging effect depends on velocity.

F118

Chrs>Flng2

Morph:

Sweeps to a flange effect.

Freq. Tracking:

Provides key tracking to enhance flange effect.

Transform 2:

Makes brighter, adds volume.

Comments:

Velocity controls degree of flange effect.

F119

Ev/OdNtch.4

Morph:

Sweeps from even notches at 200, 400, 800Hz, etc with an

overall low frequency cut-off to notches at 300, 600, 1200,
2400Hz, etc. effecting a warm to bright transition.

Freq. Tracking:

Provides key tracking.

Transform 2:

Not used.

F120

Odd/EvnNtch

Morph:

Provides subtle modulation between odd octave intervals

starting at 75Hz and even octave intervals starting at 50Hz.

Freq. Tracking:

Controls brightness.

Transform 2:

Deepens the effect and adds volume.

F121

NotchPkSwp4

Morph:

Sweeps from nasal to bright; vowel shifts from ‘oh’ to ‘ee’.

Freq. Tracking:

Controls brightness and tracks keyboard.

Transform 2:

Not used.

F122

1.5/3KNBPR4

Morph:

Morphs from thin and high to richer and deeper to a yet a

different timbre resonance; adds energy.

Freq. Tracking:

Frequency Tracking thickens the spectral plot.

Transform 2:

Not used.

Summary of Contents for MORPHEUS














































































































































































































































































Search results

Summary of Contents for MORPHEUS

Reviews:

Related manuals for MORPHEUS

Brands by name

Popular brands

E-Mu MORPHEUS, Operation Manual

Search results

Summary of Contents for MORPHEUS

Reviews:

Related manuals for MORPHEUS

Brands by name

Popular brands