E-Lins WAP100 Series Outdoor AP Quick Start
E
‐
Lins
Technology
Co.,Limited
Tel:
+86
(755)
33231620
E
‐
mail:
sales@e
‐
lins.com
www.szelins.com
1.3.4 Station WDS Mode
StationWDS mode is similar to Station mode. The difference is StationWDS must connect to access
point configured to Access Point WDS (or RootAP) mode.
StationWDS is mainly use for point-to point connection between 2 buildings or locations as far as
several kilometer away.
Point-to-Point Point-to-MultiPoint
Point to-Point
Point
to-MultiPoint
An access point setup as Access Point WDS (or
RootAP) and other as Station WDS (Transparent
Client).
An access point setup as Access Point WDS (or
RootAP) and several other devices as Station
WDS (or Transparent Client).
This mode is generally used for outdoor connections over long distances, or for indoor connections
between local networks.
1.3.5 Router Mode
In Router Mode, the device also operates as a router.
Either the wireless or Ethernet can be setup as WAN connection to a broadband modem. Wireless as
WAN is known as
S Router mode
(or
Wireless Routing Client
mode) and Ethernet as WAN
is known as
AP + Router mode
(or
Gateway
mode). Device supports several types of broadband
connections Static IP, Dynamic IP and PPPoE. For setup details refer to the respective section.
The illustration below shows the Ethernet port is setup as theWAN port and the wireless
