Alarm Management
NVR User Manual
64
see 9.4.3 Display for details.
Pop-up Message Box
: if enabled, the system will pop up the corresponding alarm message box
automatically when the sensor alarm is triggered. To set the duration time of the message box,
please see 9.4.3 Display for details.
E-mail:
if enabled, the system will send an e-mail when the sensor alarm is triggered. Before
you enable the email, please configure the recipient’s e-mail address first (see 11.1.4 E-mail
Configuration for details).
9.2 Motion Alarm
Motion Alarm
: when the motion object appears in the specified area, it will trigger the alarm.
You should enable the motion of each camera first and then set the alarm handling of the
camera to complete the whole configuration of the motion alarm.
9.2.1 Motion Configuration
1
Click Start
Settings
Camera
Motion to go to the following interface.
2
Select the camera, enable the motion and set the sensitivity and duration of the camera.
Sensitivity
: the higher the value is, the more sensitive it is to motion. You should adjust the
value according to the practical conditions since the sensitivity is influenced by color and time
(day or night).
Duration
: it refers to the interval time between the adjacent motion events. For instance, if the
duration time is set to 10 seconds, once the system detects motion, it will go to alarm and will
not detect any other motion (specific to that camera) for 10 seconds. If there is additional
motion detected during this period, it will be considered as continuous movement; otherwise, it
will be considered as a single motion.
