Camera Management
NVR User Manual
26
The IP camera which directly connects to the PoE port of the NVR through private
protocol will be shown automatically in the camera list.
One of the two conditions must be met for the IP camera which directly connects to the
PoE port of the NVR through ONVIF protocol to be shown automatically in the camera list.
The IP camera which directly connects to the PoE port must be in the same network
segment with the internal Ethernet port.
The DHCP (obtain an IP address automatically) of the IP camera is enabled.
If the IP camera which connects to the PoE port cannot be displayed automatically in the
camera list, please refer to Q6 in Appendix A FAQ for details.
4.2 Add/Edit Camera Group
4.2.1 Add Camera Group
Click “Edit Camera Group” in the above interface to go to the interface as shown below.
Click
to pop up the window as shown below. Set the group name and dwell time (the
