Record & Disk Management
NVR User Manual
48
Click “All” to set all week recording; click “Reverse” to swap the selected and deselected time
in a week; click “Clear All” to clear all the selected area in a week.
7.3.2 Record Schedule Configuration
Click Start
Settings
Record
Record Schedule
Schedule Configuration to go to the
interface as shown below. Set the schedule of sensor record, motion record, and timed record.
Click “None” in the drop-down menu to clear the schedule. Click “Apply” to save the settings.
Go to “Edit Schedules” interface and then click
to edit the schedule. The settings of “Edit
Schedule” are similar to that of the “Add Schedule”. Click
to delete the schedule.
7.4 Record Mode
7.4.1 Manual Recording
Method One
: Click
on the tool bar at the bottom of the live preview interface to enable
recording of the camera.
Method Two
: Go to live preview interface and then open the right-click menu and select
“Manually Record On” in the camera window or click
on the tool bar under the camera
window to start recording.
Note: Click Start
Settings
Record
Mode Settings and then set the manual record time in the
interface. Click “Apply” to save the settings.
