‐
96
‐
Auto Register
This function allows the device to auto register to the proxy you specified. In
this way, you can use the client-end to access the DVR and etc via the proxy.
Here the proxy has a switch function. In the network service, device supports
the server address of IPv4 or domain. Please follow the steps listed below to
use this function. Please set proxy server address, port, and sub-device name
at the device-end. Please enable the auto register function, the device can auto
register to the proxy server.
Alarm Centre
This interface is reserved for you to develop. System can upload alarm signal
to the alarm centre when local alarm occurs. Before you use alarm centre,
please set server IP, port and etc. When an alarm occurs, system can send out
data as the protocol defined, so the client-end can get the data.
