‐
15
‐
PTZ set
Here you can control PTZ direction, speed, zoom, focus, iris, preset, tour, scan,
pattern aux function, light and wiper, rotation and etc
Speed is to control PTZ movement speed. The value ranges from 1 to 8.The
speed 8 is faster than speed 1. You can use the remote control to click the
small keyboard to set. You can click
and
of the zoom, focus and iris
to zoom in/out, definition and brightness.
The PTZ rotation supports 8 directions. If you are using direction buttons on the
front panel, there are only four directions: up/down/left/right.
Here is a sheet for you reference.
Name
Function
key
function
Shortcut
key
Function
key
function
Shortcut
Key
Zoom
Near
►
Far
▶▶
Focus
Near
◀
Far
►
Iris
close
▌▌
◀
Open
▶
▌▌
In the middle of the eight direction arrows, there is a 3D intelligent positioning
key. .
Please make sure your protocol supports this function and you need to use
mouse to control. Click this key, system goes back to the single screen mode.
Drag the mouse in the screen to adjust section size. The dragged zone
supports 4X to 16X speeds . It can realize PTZ automatically. The smaller zone
you dragged, the higher the speed.
PTZ Function Setup
