SEAT AND HANDLEBAR SAFE HEIGHT MARK
Vertical Handle Stem Position
Appropriate adjustments can be made for the vertical handle stem according to personal preference or driving habit, but it is
forbidden to expose the infix notation (also called, the safety line). If used in an inappropriate way, it may cause serious injury to
the rider.
Adjustment Method:
●
Unlatch locking lever at the top of the folding pipe.
●
Move vertical handle stem to appropriate height making sure not to exceed the safety mark.
●
Screw on the lead screw in handle core.
Seat Cushion Position
When you sit on the seat cushion, step on the pedal with your heel and lower the pedal to the lowest possible position. The height
is best suited when the leg can slightly straighten out.. If only the tiptoe can step on the pedal or the leg cannot straighten out
slightly, fatigue and sports injuries may occur. Caution should be taken when making suitable height adjustments for the seat
pillar.
The MAX mark line (also called, the safety line or the infix notation), and the mark cannot be higher than tie-in of seat cushion. If
used inappropriately, serious damage may be caused to the rider.
Angle of saddle: In order to avoid the forward-tilt when driving, it is best to make slight upward-tilt adjustments for the front end
of the saddle. Appropriate adjustment can be made for pre- and post-position according to personal height, and it is suitable for
the seat post to be in middle position generally.
The lowest height of the seat: Move the quick release handle to “OPEN.” Put the saddle to the lowest position until it cannot
insert. Then move the quick release handle to “CLOSE.” This is the lowest height of seat.
The highest height of the seat: Move the quick release handle to “OPEN.” Put the saddle to the highest position but not more than
the safe line. Then move the quick release handle to “ClOSE.” This is the highest height of the seat.
