Before You Ride for the First Time:
●
Check that lever for the handlebar stem is properly tightened.
●
Check that locking lever for folding pipe is tightened and the safety clip ring is in place.
●
Check that the folding lever for the frame is tightened and safety clip is in place.
●
Check all other nuts and bolts and fixings are properly tightened, paying particular attention to the motor fixings,
kickstand, yoke, and steering head bearings.
●
Check that the brakes and brake levers are functioning properly.
●
Check that tire pressures are 60 psi/ 4.1 bar and that tires are not damaged.
●
Check that reflectors and lights are functioning properly.
●
Make sure the battery is fully charged.
●
Load battery into bicycle and turn on by pressing the ON/OFF button on the LCD display.
During Riding: Instructions and Tips
●
Once the bike is powered ON, when the rider presses down on the thumb throttle, the bike will move forward. Do not
power ON until you are ready to go.
○
Squeezing the hand brake, or releasing the throttle, will automatically cut the power to the motor.
●
To get the furthest distance, it is recommended to pedal the bicycle with the Pedal Assist System mode ON.
●
When riding your e-bike and when the battery power is low, it is recommended to pedal your e-bike as much as possible
and get the battery charged up as soon as you get to an electrical outlet.
●
Turn off the power when parking. If you decide to push your bike for any reason, make sure to turn the power off so you
don’t automatically turn the throttle on and make the electrical bicycle start suddenly and cause an accident.
●
To help get the best distance out of your electric bike, refrain from unnecessary braking and coast as much as possible.
