GENERAL OPERATING INSTRUCTIONS
Electric Assist - LED Operating Instructions
When you first turn on your electric bike, your LED Electric Assist Display will automatically go into the default setting: Pedal
Assist System (PAS) will be turned on, thumb throttle will be turned on, and battery level indicator will be turned on.
●
SWITCH Button:
○
Pressing the SWITCH button once, will turn off the PAS leaving only the thumb throttle turned on
■
NOTE: “Handler” light indicates the thumb throttle is on. If thumb throttle is turned off, the “Handler”
light will be off.
○
Pressing the SWITCH button twice, will turn off the thumb throttle (“Handler” light), and turn the PAS system
back on.
■
At this point you can use the MODE options located on the bottom of the display.
■
MODE options show you how much pedal assist you are receiving from the motor.
●
LOW - you are receiving about 30% of the motor’s capacity
●
MEDIUM - you are receiving about 50-60% of the motors capacity
●
HIGH - you are receiving about 80-90% of the motor’s capacity
○
Press the SWITCH button three times, will return the LED Electric Assist back to the original settings, with all
options on.
●
To turn off all electric assist, hold the ON/OFF button down for 3 seconds, or until all LED display lights are off. For your
safety, please turn off the power switch on the battery when the bike is not in operation.