E Instruments AQ COMFORT Instruction & Operation Manual Download Page 7

Page: 7 / 44

AQ COMFORT Instruction & Operations Manual

Version 1.01

Page 7 of 44

CHAPTER 2

INTRODUCTION

A. UNPACKING THE INSTRUMENT & PARTS IDENTIFICATION

E INSTRUMENTS AQ COMFORT kits (excluding AQ Comfort-1) include as standard

equipment:

•

IAQ Monitor Model AQ COMFORT with CO

, Temp, %RH, Dew point Temp,

WBT, Differential Pressure and Differential Temperature

•

Internal Continuous Sampling Pump

•

Battery charger / AC adaptor for the monitor

•

USB Thumb Drive includes:

•

Instruction Manual

•

Internal Wireless Bluetooth

•

Calibration Certificate

C. PROPER SAFE USE

1. Follow all the instructions in the AQ Comfort manual.

2. Do not block the two (2) exhaust ports in the back of the instrument housing.

3. Do not expose the monitor to extreme temperatures outside the stated range

4. Do not store or operate in dusty, dirty areas

5. Do not use instruments in the rain or high moisture areas to prevent water

droplets on the external Temperature and RH Sensor.

Summary of Contents for AQ COMFORT













































Search results

Summary of Contents for AQ COMFORT

Reviews:

Related manuals for AQ COMFORT

Brands by name

Popular brands

E Instruments AQ COMFORT, Instruction & Operation Manual

Search results

Summary of Contents for AQ COMFORT

Reviews:

Related manuals for AQ COMFORT

Brands by name

Popular brands