AQ COMFORT Instruction & Operations Manual
Version 1.01
Page 17 of 44
Every parameter listed on the SETUP MENU screen can be changed as follows:
a. Use the
UP / DOWN
keys to move the highlighted line to the parameter
you wish to change.
b. Press
OK
to edit the value. The parameter you have chosen will become
highlighted on the right side of the screen. This indicates that you are in edit
mode.
c. Use the
UP / DOWN
keys until the desired value of the selected parameter
appears on the display.
d. Press the
OK
key to execute the change.
A more detailed explanation of each parameter follows:
1) DATE & TIME: The monitor’s internal clock is displayed in the format month-day-
year, hour-minute-second. Hours are always displayed using a 24-hour clock
format.
2) TEMPERATURE UNITS: The
UP / DOWN
keys toggle between °F (Fahrenheit) and
°C (Celsius). The T1 temperature reading and ambient temperature will be
displayed, printed, and saved in the selected units.
3) PRESSURE UNITS: Pressure measurements can be shown in millibar (mbar),
inches of water (inWC), millimeters of water (mmWC), millimeters of mercury
(mmHG), inches of mercury (inHG), pounds per square inch (psi) or kilopascal
(kPa).
1 mbar = 0.10 kPa = 0.40 inWC = 10.2 mmWC = 12.95 inHg = 0.75 mmHg = 1.45 PSI
APR 1 ‘14 12:45:00
Temperature Units: F
Measure Units: PPM
Pressure Units: mbar
Pumps: AUTO 750cc/m
Velocity Probe: OFF
Velocity Units: FPS
Duct Size: 0 in
2
Display Contrast: 24
Baudrate: 115 kbps
Version: 1.02Li
