1
E-flite Sobré 3D Profile Assembly Manual
1. Locate the plywood motor mount and aluminum
X-mount for your particular motor. Center the motor
mount on the plywood and mark the holes for the
mounting screws using a felt-tipped pen making sure
the holes you mark do not interfere with the carbon
spars the mount will glue into.
Hint
: If the hole in your mount matches the diameter of
the hole in the plywood mount, use a rolled-up piece
of cardstock placed through the two holes to center the
motor mount on the plywood mount.
2. Drill pilot holes for the mounting holes marked
on the plywood mount using a
1
/
16
-inch (1.5mm)
drill bit.