1
E-flite Sobré 3D Profile Assembly Manual
6. Plug the servos into the receiver. Turn on the
transmitter and receiver and check the operation of
the servos. After centering the trims and sub-trims,
attach the servo arms as shown. Note the direction of
the arms on the servos.
7. Use hot glue to install the aileron servos.
Note
: The servo arms face toward the tips of the wing
and the output shaft of the servo is toward the leading
edge of the wing.
Note
: Position the aileron servo arm parallel to the
aileron hinge line.
8. Install the rudder and elevator servos using hot
glue. The output shafts of both servos face the front
of the aircraft.