Available from:
www.modelflight.com.au
Outrunner Motor Installation
Required Parts
Fuselage
Brushless motor
4-40 x 1
1
/
4
" socket head screw (4)
Aluminum motor spacer, 13/16" (20mm) (4)
Required Tools and Adhesives
Hex wrench: 3/32"
Screwdriver (Phillips #0)
Note
:.This.section.covers.the.installation.of.
the.recommended.Park.450.Outrunner.motor..
The.holes.in.the.firewall.for.mounting.the.
custom.X-mount.will.also.fit.the.hole.pattern.for.
our.E-flite®.Firewall.Stick.Mount.(EFLM1916.
–.available.separately).if.you.prefer.to.use.a.
gearbox.with.an.inrunner.motor.
1. Attach the supplied aluminum motor X-mount
to the motor using the screws provided with the
motor. The wider section of the mount will be
positioned towards the motor wires.
14
