Available from:
www.modelflight.com.au
Landing Gear Installation
Required Parts
Fuselage
Main landing gear
Wheel pant (L&R)
2" (50mm) wheel (2)
4-40 x 1/2" socket head bolts (2)
#4 black washers (2)
4-40 nut (2)
4-40 locknut (2)
4-40 x 1
1
/
4
" socket head bolts (2)
#4 steel washers (4)
2mm x 6mm wood screws (2)
Required Tools and Adhesives
Hex wrench: 3/32"
Phillips screwdriver (small)
Nut driver: 1/4"
Needle-nose pliers
Note
:.You.may.consider.using.a.larger..
diameter.wheel,.such.as.2
1
/
4
".(58mm),.if..
your.flying.site.has.rough.terrain..By.using.a.
larger.wheel,.you.will.not.be.able.to.use.the.
included.wheel.pants.
1. Place the landing gear onto the bottom of
the fuselage. They will angle back slightly when
installed in the correct direction. Attach with
two 4-40 x 1/2" socket head bolts and two #4
black washers.
12
