10
E-flite F-15 Eagle ARF Assembly Manual
8. With the radio system on, center the stabilator using
the guide on the side of the fuselage. Tighten the setscrew
to secure the pushrod wire to the elevator servo. Make
sure to use threadlock on the setscrew to prevent it from
vibrating loose.
9. Repeat Steps 1 through 8 to install the remaining
elevator servo. Make note that the pushrod is bent slightly
and the servo arms of both elevator servos face the same
direction. This will make both stabilators operate in the
same direction without the need to use mixing at the
radio.
