24
E-flite F-15 Eagle ARF Assembly Manual
13. Repeat Steps 1 through 12 to install the remaining
retract and servo. You will find one main retract servo to
operate in conjunction with the nose gear and one main
retract servo will need to be plugged into an aux channel
on your radio.
14. Locate the 185mm pushrod wire. Attach the clevis
to the steering arm on the nose gear as shown. Slide the
tubing onto the clevis to prevent the clevis from opening
during flight. Connect the clevis from the 127mm pushrod
wire to the retract actuator.
15. Use four 2mm x 8mm sheet metal screws and a #1
Phillips screwdriver to secure the nose gear. Note that the
spring for the gear faces to the front of the fuselage. Slide
the wheel onto the gear. Press a spring washer onto the
wire to secure the wheel.
16. Use the screws provided with the servos to secure
them in the fuselage. Make sure to slide the servos as far
to the sides of the fuselage as shown.
