26
E-flite F-15 Eagle ARF Assembly Manual
Aileron Servo Installation
Required Parts
Servo (2)
Wing panel (right and left)
Pushrod connector (2)
75mm pushrod w/clevis (2)
Nylon nut (2)
Control horn (2)
Servo tape covers
Carbon spar tape covers
Required Tools and Adhesives
Hex wrench: 1.5mm
6-minute epoxy
Hobby knife
1. Use a hobby knife to enlarge the outer hole of a servo
arm. Install the pushrod connector and secure it using the
nylon nut supplied with your model.
2. Install the servo arm on the aileron servos. Make sure
to center the aileron servos using the radio system before
installing the servo arms.
3. Use 6-minute epoxy to glue the aileron servo into
the wing. Note that the servo arm faces toward the
aileron. Press the servo lead into the channel in the
wing as shown.
