3
E-flite Enticememt F3P Profile Assembly Manual
Using the Manual
This manual is divided into sections to help make assembly
easier to understand, and to provide breaks between each
major section. In addition, check boxes have been placed next
to each step to keep track of each step completed. Steps with
a single circle (
) are performed once, while steps with two
circles (
) indicate that the step will require repeating, such
as for a right or left wing panel, two servos, etc.
Remember to take your time and follow the directions.
Contents of Kit/Parts Layout
Replacement Parts
EFL1176
Motor Mount/Firewall
EFL1177
Carbon Pushrod Set
EFL1178
Carbon Bracing and Landing Gear
EFL1179
Wheel Pants
EFL1180
Pushrod Supports (Wood)
EFL1181
Landing Skids, 2.5mm
Required Radio Equipment
You will need a minimum 6-channel transmitter (for proper
mixing and dual rate capabilities), crystals, micro receiver,
and three sub-micro servos. You can choose to purchase a
complete radio system that includes all of these items or, if
you are using an existing transmitter, just purchase the other
required equipment separately. We recommend the crystal-free,
interference-free Spektrum
™
DX7 2.4GHz DSM2
™
7-channel
system. If using your own transmitter, we recommend the use of
a JR SPORT
™
6-channel UltraLite receiver and E-flite
®
S60 Super
Sub-Micro servos for 72MHz users or the Nanolite 6-channel
flight pack for Spectrum users.
For Spectrum DX7 users
SPMAR6300F
DSM2 6CH Nanolite Flight Pack
For 72MHz users
JRPR610UL**
R610UL 6CH FM, Shrinkwrap
FM Receiver (72MHz)
EFLRS60
6.0-Gram Super Sub-Micro Servo (3)
If you are using a Spectrum DX6
SPM6000
AR6000 DSM 6-Channel Park
Flyer Receiver
EFLRS60
6.0-Gram Super Sub-Micro Servo (3)
