16
Note
: If you have selected the outrunner motor
option, install the propeller adapter onto the
motor shaft.
Note
: The propeller will have to be drilled out
using a 15/64" drill when using the outrunner
motor and propeller adapter.
Cowling Installation
Required Parts
Airframe
Rubber spinner or propeller adapter
3mm locknut
3mm washer
10 x 7 propeller
2mm x 5mm screw (4)
Required Tools and Adhesives
Phillips screwdriver (small)
Hobby knife
Hook & loop
1. Slide the cowling onto the fuselage, then the
propeller. Make sure there is clearance between
the cowling and propeller. Drill four locations for
the cowling screws.