18
Radio Installation
Required Parts
Fuselage
Wing
Micro control connector (5)
Control connector backplate (5)
2mm x 8mm screw (8)
Aileron servo cover (2)
3" linkage (2)
Y-harness, standard 6"
Servo extension 6"
Double-sided tape (2)
Required Tools and Adhesives
Phillips screwdriver (small)
Hobby knife
Hook & loop
String
Hot glue gun
1. Attach a micro control connector to the servo arm
for the elevator. Use the connector backplate to
secure the connector.
2. Plug the elevator servo into the receiver and
turn on the radio. Make sure the trim has been
centered, and then attach the servo arm to the
servo as shown.
