2-1
Revised February 1997
Part No. 001-9750-005
INSTALLATION
Figure 2-1 97xx Front Mount Installation Components
Item
No.
Description
Part No.
Item
No.
Description
Part No.
1
Amplified dynamic mic
250-0740-310
7
Self-drilling screw (4)
575-9077-565
2
Screw, 4-20 x 5/8” thread frmg (3)
575-5604-020
8
Knob (4)
547-0016-005
3
Screw, 4-24 x 1/4” sheet metal (3)
575-3604-008
9
Power cable (22') and hardware
023-9750-010
4
Microphone hanger clip
023-3514-001
10
Accessory wire and hardware
023-9750-011
5
Mic hanger ground wire
023-7171-911
11
5" remote speaker
250-0151-006
6
Transceiver mounting bracket
017-2226-034
---
Butt splice connector (2)
586-9008-061
2.1 GENERAL
2.1.1 SCOPE OF INSTRUCTIONS
Since each installation is somewhat unique, the
following installation instructions are intended only as
a general guide to installing this transceiver. Described
are the intended use of the mounting hardware and the
electrical connections that should be made.
2.1.2 PERFORMANCE TESTS
Although each transceiver is carefully aligned
and tested at the factory, shipment can alter these
settings or damage the transceiver. Therefore, it is
good practice to check transceiver performance before
it is placed in service. Performance tests are located in
Sections 8.5 and 8.6.
SECTION 2 INSTALLATION
Summary of Contents for Summit DM 975x
