INSTALLATION
2-10
Revised February 1997
Part No. 001-9750-005
2.8 TRANSCEIVER MOUNTING TRAY
INSTALLATION
2.8.1 DESCRIPTION
Optional Transceiver Locking Tray, Part No. 585-
7000-185, is a lockable mounting bracket for Summit
DM transceivers and other transceivers that use that
chassis. This bracket provides theft protection and
allows the transceiver to be quickly removed from the
vehicle.
2.8.2 INSTALLATION
Refer to Figure 2-6 and proceed as follows:
a. Install the transceiver in bracket MP2 using the four
10-32 x 1/2” screws (HW2) included. If desired, this
mounting bracket can be used to mount the trans-
ceiver directly to the vehicle.
b. Install lock bracket MP1 using the four self-drilling
screws (HW3) and washers (HW5) included. Make
sure that there is nothing under the mounting loca-
tion that will be damaged.
2.8.3 LOCKING AND UNLOCKING
TRANSCEIVER
To insert the transceiver with attached mounting
bracket into the locking bracket, set it over the locking
bracket and push it rearward slightly if necessary so
that it seats. Then pull it forward until it latches.
The lock operates in a manner similar to most
glove compartment locks. To release the transceiver,
press the button and at the same time push the trans-
ceiver rearward. The key locks the button so that it
cannot be pressed.
Figure 2-6 Locking Tray Installation Diagram
Summary of Contents for Summit DM 975x
