E.F. Johnson Company CONVENTIONAL VOTING RECEIVER, User Manual

Page: 94 / 148

900 MHz RECEIVER
5-4
July 2000
Part No. 001-2000-720
Delete Repeater
Figure 5-10 DELETE REPEATER
5.2.4 TRANSFER
Figure 5-11 TRANSFER MENU
Write Setup Parameters
This command sends the contents of a file to the
repeater and programs the EEPROM memory in the
Interface board.
Figure 5-12 WRITE SETUP PARAMETERS
Figure 5-13 PROGRAM WRITE SETUP
Read Setup Parameters
This command reads the contents of the
EEPROM memory of the Interface board and loads it
into a buffer. The contents of the buffer is then dis-
played to show the programming of the repeater.
Figure 5-14 READ SETUP PARAMETERS
Figure 5-15 READING SETUP
Select Rptr To Delete
Rptr 1
Program Rptr 1
Ok Cancel
Programming Setup Parameters
Count = 1
Ok Cancel
Read Setup Parms?
Reading Setup Parameters
Attempting access to Repeater
Figure 5-16 HARDWARE PROGRAMMING FLOWCHART
Data Received From Radio
Data Transmitted to Radio
Home
UID
GID
Pri
Stat
Time
RX/TX Data
HARDWARE
RF Data RF Line Monitor
Mode Select
Normal
Test
Revisions
Receive Synthesizer
Receive High Stability
Wideband Audio Output
LO Injection
RSSI