E.F. Johnson Company CONVENTIONAL VOTING RECEIVER, User Manual

Page: 71 / 148

800 MHz RECEIVER
4-3
July 2000
Part No. 001-2000-720
4.2.3 EDIT
Figure 4-6 EDIT MENU
This menu is used to create new files and set or
change the CVR operating parameters. The filename
for the CVRs in this file is shown in the lower left cor-
ner of the screen.
Figure 4-7 SETUP PARAMETERS
Setup Parameters
This programs the Receiver parameters and
options of each CVR at a Site. The following para-
graphs explain the parameters that are set by this
screen (see Figure 4-7) and give a brief description of
each.
NOTE: The parameters are shown in the lower left of
the pop-up screen for reference.
Repeater Number
Each CVR is programmed with a repeater num-
ber from 1-30 for reference. Number selection can be
arbitrary as long as each CVR is assigned a different
number.
Channel Number
Each repeater is programmed with a channel
number (1-920).
NOTE: Repeater program channel numbers 1-599
increment in 25 kHz steps. Program channel numbers
600-920 increment in 12.5 kHz steps. See Appendix A
to determine the correct operating frequency.
Select Repeater
Select the repeater number to be programmed or
edited from the pop-up menu (see Figure 4-8). Move
the cursor with the arrow keys to highlight the repeater
number and press Enter.
Figure 4-8 REPEATER LIST
Repeater Type Selection
This screen (see Figure 4-9) selects the repeater
type and features:
Frequency Band 800 MHz
800 MHz (-12.5 k)
Figure 4-9 REPEATER TYPE SELECTION
Repeater List
default
Rptr 1
-------
-------
-------
Rptr 30