4-1
TRANSCEIVER PROGRAMMING
SECTION 4 TRANSCEIVER PROGRAMMING
Figure 4-1 Programming Setup
5100 Programming Cable
Connect To
Serial Port
Part No. 023-5100-920
4.1 PROGRAMMING SETUP
The following items are required to program the
transceiver. The part numbers of this equipment are
shown in Table 1-1 in Section 1. The programming
set-up is shown above.
•
Computer running Windows
®
software
•
5100 Programming Cable, Part No. 023-5100-920
•
PCConfigure programming software, Part No.
023-9998-488.
NOTE: The -920 cable, -488 software, and a CD
manual are included in the 5100 Series Programming
Kit, Part No. 250-5100-003.
4.2 COMPUTER DESCRIPTION
The computer used to run this program should
meet the following minimum requirements:
The computer used to run this program should
meet the following minimum requirements:
•
Windows 95/98/NT/2000
•
Pentium
®
processor or equivalent
•
At least 16 MB of RAM
•
A hard disk drive with at least 4 MB of free space
•
A CD-ROM drive
•
An available serial port
4.3 USING THE PCCONFIGURE SOFTWARE
The PCConfigure software is described in a sepa-
rate manual included on the CD-ROM with th
e
service manual.
Tone (CTCSS) and digital (DCS) Call Guard
tones and 800 MHz channel frequencies are located in
the back of the above manual.
NOTE: The latest programming manual is also
included on the PCConfigure CD-ROM.
Summary of Contents for 5100 Series
