27
5.21 "Customer Adjustment - Co
2
" screen
In measurement mode press button (1) in fig. E and select
one of the calculation modes shown in fig. B.
The CAL button will appear in the top right corner (only if
adjustement is possible for the selected measurand).
2
E.
f.
G.
1
H.
Adjustment is always performed for the
measurand in the top box !
In
CO
2
mode adjustement is only possible for the measurand
"
CO
2
momentary". The averaged value cannot be adjusted.
Press button CAL (2) in fig. F to open the customer adjust-
ment mode.
4
For
CO
2
probes an offest / gain adjustment is possible.
Select the value field (4) or (5) in fig. G to adjust the current
measured value (3).
3
Using the keypad in fig. H, enter the offest (4) and gain(5)
deviations.
Press OK (6) to confirm and return to measurement mode.
Set the deviance to 0.00 to restore
factory settings
.
6
5