18
5.12 "measuring mode – Humidity" screen
1 Specifies how measured values and the corresponding
units are shown (see chapter "Explanation of the measu-
red values", page 28). The latest measured value is dis-
played next to the corresponding key on the right. Select
"Off" to switch the respective display off.
2 This symbol indicates, that the displayed measured values
under (4) are calculated (e.g. minimum/maximum measu-
red value).
3 Indicates the measurement duration.
4 Displays the measured values according to the specifica-
tions under (1) and (6):
°C:
Displays the temperature according to the
specifications under (1) (e.g. in degrees Celsius)
and under (6) (e.g. as average value).
g/m3: Displays the humidity according to the
specifi- cations under (1) (e.g. in gram per cubic
metre) and under (6) (e.g. as average value).
hPa: Displays the air pressure according to the
specifications under (1) (e.g. in the measuring unit
hectopascal) and under (6)
(e.g. as average value).
5 Sets the measured values shown under (4) back to zero.
6 Specifies how the measured values under (4) are shown
(see fig. B.):
Minimum:
Always shows the smallest detected
measured value from a measuring period.
Maximum:
Always shows the largest detected
measured value from a measuring period.
Average:
Shows the average value of all detected
measured values from a measuring period.
Hold:
Pauses the current detected measured
value and shows it continually (when this
option is selected).
Off:
Switches off the measured values (4).
7 Carries out an automatic measurement for the duration of
an already specified recording interval. The recording
interval can be specified in the following screen
(see fig. C. and fig. D., page 19).
8 Saves the currently displayed measured value as single
measurement in the archive with date and time stamp.
9 Opens the customer adjustment screen.
1
2
3
4
5
6
7
8
A.
b.
9