16
5.10 "measuring mode – flowrate – measuring range" screen
19 Selects the form of the object to be measured. The
following options are available (see fig. F.)::
1. Square (volumetric flow measurement)
2. Round (volumetric flow measurement)
3. Off (no volumetric flow measurement)
Depending on the selected form, a different equation is
used to calculate the measured values. The measured
values displayed under (1) or (3) in fig. A., page 14
depend on the settings selected here.
20 Determines the diameter of the object to be measured
(with selection "Round" under (19)).
21 Determines the height of the object to be measured (with
selection "Square" under (19)).
22 Determines the width of the object to be measured (with-
selection "Square" under (19)).
23 Saves the settings and returns to fig. A., page 14.
The measured values for the volumetric flow can only be
displayed under (1) in fig. A., page 14.
During volumetric flow measurement, further measured
values, such as the flow rate, can be displayed under (3)
in fig. A., page 14.
Note!
The settings saved here are also used for all following
measurements, unless they are deactivated (in the
corresponding menu item)
E.
f.
19
20
21
22
23