15
5.9 "measuring mode – flow rate – Automatic measurement" screen
11
Shows the measured flow rate as a numerical value in
the selected unit (e.g. m/s).
You can select the unit under (1) in fig. A., page 14.
12 Shows the measured flow rate as visual bars.
Note!
This display is only available when measuring flow values
The representations in fig. C. can slightly deviate depen-
ding on the previous setting.
13 Shows the measured temperature value.
14 Shows the remaining time until the automatic
measurement finishes.
15 Opens a screen for selecting the recording duration
(see fig. D.).
16 Starts recording.
The key turns red once recording has started.
Note!
During an active recording it is not possible to switch off
the multifunctional hand-held with the "On/Off" key. Auto
matic switch-off is also deactivated. First stop the recor-
ding by pressing key (17) and then turn off the device.
17 Stops the current recording. The detected values are auto-
matically saved to the current measuring project.
18 Pauses the current recording.Key (16) flashes.
Press the key (18) again to continue recording.
13
12
11
14
15
16
17
18
C.
d.