E+E Elektronik EE36 Series, Manual

Page: 19 / 32

19
Self diagnostics via LEDs on the circuit board:
•
Green LED
flashing
⇒
Supply voltage applied / Microprocessor is active
•
Red LED
constantly lit
⇒
Humidity sensor element damaged
flashing
⇒
Humidity sensor element accruing moisture (condensation!)
Self diagnostics via display (where available):
Error 1
⇒
Humidity sensor element damaged
Error 2
⇒
Humidity sensor element moistened (condensation!)
Error 3
⇒
Temperature sensor element damaged
Error 4
⇒
Temperature input short circuit
Definitions:
•
Error
possible cause
⇒
Measures / Help
•
Display shows incorrect values
Error during re-adjustment of the transmitter
⇒
Reset to factory calibration and repeat the calibration routine
Filter soiled
⇒
Replace filter
Sensor defective
⇒
Replace sensor
Output configured incorrectly
⇒
PC - Software
•
Transmitter failure
no supply voltage
⇒
Check wiring and supply voltage
⇒
only green LED is illuminated continuously
⇒
Electronics defect
⇒
contact the manufacturer
8.6 Replacement of sealing element
Because of repeated installations and various other circumstances the sealing
element can get damaged. The customer can do a replacement of this sealing
element (refer to drawing).
8.5 Self diagnostics and error messages
9. REPLACEMENT PARTS / ACCESSORIES
Description Order Code
- Stainless steel filter HA010110
- Display and housing cover in metal D05M
- Display and housing cover in polycarbonate D05P
- Replacement probe
- for EE36 with 2m cable HA010902
- for EE36 with 5m cable HA010905
- for EE36 with 10m cable HA010910
- Replacement sensor
- Humidity sensor with sensor data FE10
- Temperature sensor with sensor data TE38
- RS232 interface cable, 2m HA010301
- Mounting rail bracket HA010203
- Ball valve set HA050101
- Sealing element HA050309
Hardware
sealing element