e-con Systems See3CAM CX3RDK Series, Application User'S Manual

Page: 5 / 16

See3CAM_CX3RDK _e-CAM59CX3 Application User Manual 10-March-2014
www.e-consystems.com | Subject to change without notice Page 5 of 16
The See3CAM_CX3RDK with e-CAM59CX3 has the following UVC camera controls,

Brightness

Contrast

Hue

Saturation

Sharpness

White Balance (Manual and Automatic)

Exposure (Manual and Automatic)

Focus (Manual and Automatic)
All these controls can be controlled using the e-CAMView application which will be explained in
the further sections.
This document explains the following things.

Selecting the supported preview resolutions.

Selecting the still image resolution.

Capturing still images.

Using supported controls.
5 Pre-Requisites
This section describes the high level instructions to install the See3CAM_CX3RDK on a PC.
Please refer the Getting Started manual for more detailed installation steps and pictures of the
same.
5.1 Installation of the See3CAM_CX3RDK and Drivers
Follow the following steps to initialize the device with the host computer

Connect the one end of the USB 3.0 cable to the USB 3.0 connector provided at the side
of See3CAM_CX3RDKand connect the other end to the USB 3.0 host controller on the
computer.

Move the power switch to on position,

Once Switched ON, the LED light on the device will glow indicating that
See3CAM_CX3RDK is powered up and ready to use.

As See3CAM_CX3RDK is a generic USB Video Class device windows will automatically
detect all the drivers and will be installed. This happens for the first time and from the
second time device will be detected immediately by the host PC and will be ready for use.

To see the preview the e-CAMView application designed for See3CAM_CX3RDK has to
be installed. The installation steps are given in the
section 5. Installation of e-CAMView
of the e-CAMView Installation Manual for See3CAM_CX3RDK_e-CAM59CX3_1_2
document.