![background image](http://html1.mh-extra.com/html/unidata-communication-systems/neon-2000-family/neon-2000-family_manual_3746858001.webp)
Manual
Neon 2000 Family
2024F Neon Bore Hole Telemetry Module
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC
Rules in the U.S.A. These limits are designed to provide reasonable protection against harmful interference when the equipment
is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to
correct the interference at his own expense.
This equipment has been tested for compliance with European regulations as follows:
Application of Council Directive:
2004/108/EC
Standards to which Conformity is declared:
EN-61000-6-1:2001
EN-61000-4-2:1995
EN-61000-4-3:1995
EN-61000-4-4:1995
EN-61000-4-6:1996
ENV-50204:1995
Any changes or modifications to this equipment not expressly approved by the manufacturer Unidata Pty Ltd could void the
user’s authority to operate this equipment.
Revision History
File name/Revision
Date
Author & Change Details
Checked/
approved
Unidata Manual - Neon 2000 Family Remote Terminals and
Modules issue 4.0
25/09/2013
MP – Reformat for web site
Unidata Manual - 2024F Neon Bore Hole Telemetry Module -
28 05 2015.docx
28 05 2015
PC – Major Update
Unidata Manual - 2024F Neon Bore Hole Telemetry Module -
09 06 2015.docx
09 06 2015
PC – Reviewed
Unidata Manual - 2024F Neon Bore Hole Telemetry Module -
22 07 2015.docx
22 07 2015
DM – Add info on reed switch
alignment and hex tool
Unidata Manual - 2024F Neon Bore Hole Telemetry Module -
20 04 2016.docx
20 04 2016
DM – Update
Assembly/Disassembly
procedure, added jumper
settings
CB