![background image](http://html1.mh-extra.com/html/e-con-systems/see3cam-130a/see3cam-130a_inspection-procedure_3058423007.webp)
PRODUCT INSPECTION PROCEDURE
Disclaimer:
The information in this document is confidential. It may not be reproduced in whole, or in
part, nor may any of the information contained therein be disclosed without the prior consent of e-con
Systems India Pvt Ltd
Format # : EDSG/F/015
Rev# : 1.1
7.4. Board’s Connector Details
Connector
Description
Manufacturer
Part Number
USB 3.1 GEN1 Type C
connector
CONN RCPT USB C 3.1 SMT R/A Molex
105450-0101
GPIO Header (CN3)
10 Position Socket Connector
0.031" (0.80mm) Surface Mount,
Right Angle Tin
Hirose Electric Co
Ltd
DF52-10S-0.8H(21)
Mating
Connector
for
GPIO Header
10 Position Rectangular Housing
Connector
Plug
Black
0.031"
(0.80mm)
Hirose Electric Co
Ltd
DF52-10P-0.8C
Wire crimp
Contact Crimp Non-Gendered 28-
32 AWG Tin
Hirose Electric Co
Ltd
DF52-2832PCF
The below table describes the pin-outs of USB 3.1 GEN1 connector which is used to connect
See3CAM_130A board with PC through Legacy USB Type-A to Type-C Cable. This is a standard USB
Type-C connector.
Pin
No
Signal
Description
Pin
No
Signal
Description
A1
GND
Ground return
B12
GND
Ground return
A2
SSTXp1
SuperSpeed differential pair
1, TX, positive
B11
SSRXp1
SuperSpeed differential
pair 2, RX, positive
A3
SSTXn1
SuperSpeed differential pair
1, TX, negative
B10
SSRXn1
SuperSpeed differential
pair 2, RX, negative
A4
VBUS
Bus power
B9
VBUS
Bus power
A5
CC1
Configuration channel
B8
SBU2
-
A6
Dp1
Hi-Speed differential pair,
position 1, positive
B7
Dn2
Hi-Speed differential
pair, position 2, negative
A7
Dn1
Hi-Speed differential pair,
position 1, negative
B6
Dp2
Hi-Speed differential
pair, position 2, positive
A8
SBU1
-
B5
CC2
Configuration channel
A9
VBUS
Bus power
B4
VBUS
Bus power
A10
SSRXn2
SuperSpeed differential pair
4, RX, negative
B3
SSTXn2
SuperSpeed differential
pair 3, TX, negative
A11
SSRXp2
SuperSpeed differential pair
4, RX, positive
B2
SSTXp2
SuperSpeed differential
pair 3, TX, positive
A12
GND
Ground return
B1
GND
Ground return
General Purpose pins are used for specific camera image processing. The description is as follows
CN3
Pin no
Signal name
Pin Type
Description
Remarks
1
VCC_5V
Power
Supply voltage for external
Flash circuit
It can source up to
300mA in USB 3.1 GEN1 only.
Don’t connect any load when
See3CAM_130A connected with
USB2.0. Any surge current
drawn from this voltage source
will affect the camera.
2
VCC_5V
3
NC
-
-
-