background image

 

 

                PRODUCT INSPECTION PROCEDURE 

 
 

Disclaimer:

 The information in this document is confidential. It may not be reproduced in whole, or in 

part, nor may any of the information contained therein be disclosed without the prior consent of e-con 
Systems India Pvt Ltd

 

Format # :  EDSG/F/015 
Rev# : 1.1

 

 

 

2. Introduction 

This document shall serve as a guide for users and manufacturers who would work on See3CAM_130A 
for testing the peripherals and interfaces attached to See3CAM_130A. 

3. Scope 

This manual explains in detail about the procedure for testing the peripherals of See3CAM_130A with 
test application provided by econ.

 

4. Inspection precautions 

Before  testing  the  boards,  the  test  Engineer  should  ensure  that  the  boards  were  checked  for  any 
missing components in BOM, there should no solder bridge or lead balls in the assembled PCB, then 
the boards should be tested for any possible power supply shorts. 

5. List of Equipment Required 

5.1. Hardware Tools 

Sl. No 

Item description 

Quantity 

See3CAM_130A  board 

USB Type-C to Type-A Cable 

PC/Laptop with USB 3.0 port 

 

5.2. Software Tools 

Sl. No 

Item description 

Diagcam Application V. 1.0.32 or above  

6. Product Technical Specification 

• One Board Solution of size 80mm x 15mm 
• 13.0 Megapixel colour camera sensor with Auto-Focus feature 
• Uncompressed UYVY format and Compressed MJPEG format 
• USB 3.0 device with Type C reversible interface connector 
• Lightweight, versatile, and portable design 
• 10 pin GPIO header for standard and custom operations. GPIO pins accessible from the PC host 
application 
• Plug-and-Play setup (UVC compliant) for windows 7, 8.1, 10 and Ubuntu 12.04, 14.04, 16.04. 
• Supported interleaved High Dynamic Range (iHDR). 
• Imaging applications 
• True 13.0-megapixel CMOS Image sensor 
• Still Capture supported resolution 
   

•  UYVY – VGA, HD (720p), 960P, Full-HD (1080p), 1440P, Ultra-HD (4K), 2880P, 4K_Cinema 

 

and 13MP 

    

•  MJPEG – VGA, HD (720p), 960P, Full-HD (1080p), 1440P, Ultra-HD (4K), 2880P, 

 

4K_Cinema and 13MP. 

 

•  Preview format UYVY-VGA, HD (720p), 960P, Full-HD (1080p), 1440P, Ultra-HD (4K), 

 

2880P, 4K_Cinema and 13MP. 

 

• Preview format MJPEG-VGA, HD (720p), 960P, Full-HD (1080p), 1440P, Ultra-HD (4K), 

 

2880P, 4K_Cinema and 13MP. 

Summary of Contents for See3CAM 130A
























Reviews: