background image

 

2

PREFACE

 

 
This manual contains installation and user’s operating instructions. The detailed information about 
technical data, selection of the appliance location, fitting the connections (water systems, gas 
supply, flue connection and electricity supply), gas type conversion, maintenance and fault/Error 
finding are placed in your manual. Please read the instructions carefully for operating the water 
heater a long time period and to maximize benefit from the water heater specifications. 
 
Please keep all your documents safe. 
 
 

GUARANTEE & SERVICE 

 
 

¾

 The appliance has guarantee period against faulty workmanship or material in condition that the 

instructions and precautions in this manual must be obeyed. The service operations and general 
maintenance must be carried out only by qualified person.  
 
 

¾

 The warranty certificate must be registered by Service in the installation day.  

 
 

¾

 Your appliance need not any repairs if operated according to this manual. For assistance or 

additional information, consult qualified person, installer or gas supplier.  

 
 

SYMBOLS’ DEFINITIONS 

 

The symbols have been placed on particular points to make some instructions more noticeable. The 
symbols’ definitions are described as follows: 

 
 

 

¾

                                      - 

CAUTION: Property damage and/or non-severe injury can happen. 

                                                                                  
 

 

¾

                                       - WARNING: Severe injury or death can happen.  

 
 
 

 

¾

                                        

: The important explanations to be considered by users.  

 
 
 
 

 

¾

                                         

: The situations that can only be interfered by qualified person.  

 
 
 
 
 
 
 
 
 
 
 

 

 

 

Summary of Contents for 22 HS -11






















Reviews: