13
Electricity Supply
Electrical installation should be made according to the national and local instructions.
The water heater must be earthed and a standard 230 V AC - 50 Hz supply is required.
WARNING: Disconnect power supply to prevent electrical shock before connecting
the electricity supply.
WARNING: If the supply cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid a hazard.
START-UP
Final Checks And Operations Before Start-up
Having completed the installation and connections (flue, electricity supply,
gas supply and water circuits) of the appliance according to the authorized
gas company regulations and relevant standards, the final checks and
operations must be carried out by qualified person.
This appliance is not intented for use by person (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the
appliance.
Open hot water tap to check the water circuit. Check any leakage water pipes.
Check whether flue kit is comprised of original parts or not according to the instructions and
regulations.
In addition,
¾
Electricity connections of the heater must be earthed and suitable with main supply conditions
(230 V AC - 50 Hz).
¾
Gas supply must be checked by the qualified gas company.
Call qualified service to heater start-up after all these processes are completed.
: The start-up must be performed certainly by qualified person.
:
After the start-up, you should request information about operating
the water heater and safety precautions from qualified person.
1
2
