20
KH 2370
21
KH 2370
General functions of the combination
unit
Setting playback volume
Press the Vol + button to increase the playback volume. To
decrease the playback volume press the Vol – button.
The change in the volume between MIN (sound off) and
MAX (maximum volume) will be shown in the display.
Switching the playback sound to mute
(Mute)
To switch the playback sound to mute, press the but-
ton while playing back DVDs, VCDs/S-VCDs, audio CDs as
well as CD-Rs/CD-RWs with MP3 files. If you would like to
switch the playback sound back on, then press the button
once more.
Equalizer functions
The combination unit has a five-step equalizer function.
With this function you can, in addition, adjust the sound
playback to suit your personal hearing preferences. To
switch on the equalizer function, press the PRE-EQ button.
Every time you press the PRE-EQ button, you switch on
one of the equalizer settings JAZZ, ROCK, CLASSIC, POP
and FLAT. Each of these settings has its own characteris-
tic emphasis of high, medium and low tones (basses). The
equalizer setting at any one time appears in the display of
the combination unit.
Setting the clock
To set the time display shown on the display of the combi-
nation unit:
1
If a disc is being played back: First of all stop the play-
back by pressing the STOP button twice.
2
Press the MODE button once. The currently input time
will be shown in the display of the combination unit.
3
Press the CLK ADJ button once. The first two digits of
the time display now flash.
4
Set the first two digits of the time display to between
00 and 23. Use the SKIP forwards and SKIP backwards
button to do this.
5
Subsequently press the CLK ADJ button. The last two
digits of the time display now flash.
6
Set the last two digits of the time display to between
00 and 59. Use the SKIP forwards and SKIP backwards
button to do this.
7
To save the new input time, press the CLK ADJ button
again.
Using the timer
The combination unit can switch itself on automatically at
a fixed time with the timer function. You can select wheth-
er an audio CD should be played back or the radio should
be switched on.
Note:
If you would like to use the timer function to switch on
the radio, then the radio station must be saved.
Look at the chapter “Radio mode” for more information on
this subject.
For the timer function to work properly, the time in the
display of the combination unit has to be set correctly.
Check this and, if necessary, set the correct time. To switch
on the timer function:
1
If a disc is being played back: First of all stop playback
by pressing twice on the STOP button.
To switch on the audio CD playback:
2
Put the audio CD, which you would like to play back
with the timer function, into the combination unit.
3
Press the CD/DVD button, if you would like to switch
on the audio CD playback with the timer function. Go
directly to step 4 and continue reading.
To switch on the radio:
2
Press the TUNER/BAND button.
3
Now select the radio station which should be switched
on with the timer function. To do this, use the PAUSE/
MEM UP and REPEAT/MEM DN buttons on the combi-
nation unit. The memory slot of the selected radio sta-
tion and its frequency will be shown in the display of
the combination unit.
4
Press the TIMER button.
5
Press the MODE button twice. The input time and TIM-
ER ON will be shown in the display.
6
Now set the time at which the timer function should
switch on the combination unit. Press the CLK ADJ but-
ton once. The first two digits of the time display now
flash.
7
Set the first two digits of the time display to between
00 and 23. Use the SKIP forwards and SKIP backwards
buttons to do this.
