Changing/fitting the belt
(steel/yellow model only)
11
E
Use back of cleaner as lever,
loop belt around thumb. Turn the
belt 90 degrees, stretch and
release over spindle.Belt must be
free of twists as shown.
F
Rest the three tabs on inside of
yellow bumper strip and secure
soleplate back into position.
G
Ensure soleplate is in correct
position before use.
Optional:
Mini turbine head
A
Release catches and remove
the soleplate.
B
Remove both brushbars and
clear away thread and hair.
C
To reassemble, match the arrows
on the brushbar to the arrows on
central support.
D
Align front of soleplate with front
of tool and secure all 3 catches.
E
Ensure slider is set as shown.
Important information
Ensure soleplate is in correct
position before use.
A
B
D
C
Optional:
maintaining the Mini turbine head
E
E
F
G
10072_DC14_UK_OP_MAN p1-12 5/10/04 10:57 AM Page 10
