background image

Using your Dyson

4

Do not

press the cyclone release

catch whilst carrying the machine.

• Ensure the cyclone pack is secured

to the machine.

• Do not

shake the machine

whilst carrying.

• Keep hair and loose fabrics away

from wand cap when machine is on.

Anti-jam brushbar

(not steel/yellow model) 

DC14 steel/yellow is not suitable for
hard floors, as the brushbar cannot
be turned off.

We recommend brush control
models for homes with mixed
flooring. 

Ensure the machine is in an upright
position before adjusting the setting.

Press on/off button

1

, push cleaner

head down with foot and pull

handle towards you.

Use the carry handle to lift

the machine. 

Tools

A

Push back wand cap.

B

Pull wand from inside wand

handle until it locks into place.

C

Press button to release hose and

wand handle from machine.

D

To push wand back inside hose,

ensure hose is straight. Press the

release catch and push wand

back inside wand handle.

Important information

A

B

C

• The machine is intended for

domestic use only.

• Fine dust such as plaster dust

should only be vacuumed in very
small amounts.

For hard floors

For carpets

D

1

10072_DC14_UK_OP_MAN p1-12  5/10/04  10:57 AM  Page 3

Summary of Contents for DC14 All Floor













Reviews: