D-11
F O L D I N G R A M P I N S T A L L A T I O N
Ramp Installation—iX Upgrade
Version 2
Above Ground Model 200iX/250iX Motorcycle Dynamometer Installation Guide
5
Secure the ramp panel to the iX ramp using four 1/4-20 x 5/8-inch pan-head torx
screws and four 1/4-20 nuts.
6
Secure the ramp panel to the dyno ramp using four 1/4-20 x 5/8-inch pan-head
torx screws and four 1/4-20 nuts.
Note:
If the dyno ramp does not have the holes, drill four 1/4-inch holes.
Figure D-11: Securing the Ramp Panel to the Ramp
iX ramp
ramp panel
dyno ramp
