Dynisco UPR700, Installation And Operation Manual

Page: 15 / 72

UPR700 Microprocessor-Based Pressure/Process Indicator 15
3. U
NPACKING
Upon receipt, examine package for shipping damage. Notify the carrier immediately in the event of
any evidence of damage, and retain shipping materials for their inspection.
This package should contain the instrument, two panel mounting brackets, a sheet of peel-off labels
with a variety of engineering units and an
Installation and Operation Manual.
4. D
IMENSIONAL
I
NFORMATION
Dimensions: 3.78" X 3.78" X 6.01" overall (96mm X 96mm X 143.5mm)
Cutout: 3.62" X 3.62" (92mm X 92mm)
Depth behind panel: 5.04" (128mm)
Weight: 1.43 lbs. (650g)
5. H
ARDWARE
The UPR700 is shipped with the hardware jumpers set for the following:
Primary Input (Pressure) - Strain Gage
Optional Secondary Input - Thermocouple
Main Output - Voltage
Optional Secondary Output - Voltage
In addition the DIP switches controlling the software security lock codes are in the “OFF’ positions.
Please refer to the drawings in the appropriate sections to determine the correct jumper locations for
the input(s) and output(s) used in your particular application. It is necessary only to select the
category (e.g. Voltage or Current). The specific range will be chosen in the software menu.