PowerDepot H5B series User Manual
13
Installation procedure
：
1
．
Use the positioning cardboard
(provided in accessory package) and
mark the screw hole positions on the
wall, as shown eight holes in the picture
on the left.
2
．
The cardboard must be perpendicular
to the ground while marking the holes.
3
．
The bottom of the cardboard is about
300mm to the ground.
5. Fixing the shell of the M6 expansion
bolt into the hole on the wall, and fix
the Support bracket and Battery bottom
bracket on the wall with M6 bolts and
control the torque force 6NM.
4
．
According to the marked position, use an
electric drill to drill 8 holes with a
diameter of 10mm on the wall for
installing M6 expansion bolts. The depth
of the holes should be greater than
70mm.
