POWERCUBE User Manual
16
3.2.2 Mechanical installation
Case1: If the normal power of inverter is
≤
5kW, Mechanical installation shown as follows:
Figure3-1
Table 3-3 Interface Definition
Item
Name
Definition
Interface1
Power cable- negative
waterproof connector
Reserve
Interface 2
Power cable- negative
waterproof connector
The battery DC output negative pole
Interface 3
RJ45 network cable
connector
Reserve
Interface 4
RJ45 network cable
connector
CAN/RS485 communication interface
(Factory default CAN communication mode)
1.
Fix the Powercube cabinet to the mounting
position and remove the front cover.
Pass the total positive cable and the total
negative cable (Power cable- positive1/ Power
cable-negative1
) through the waterproof
connector on the back of the cabinet, and
insert the external CAN cable(Communication
cable-to inverter2
) into the RJ45 network
cable connector(Interface 4).
1 2 3 4 5 6
Summary of Contents for POWERCUBE Series
Page 1: ...POWERCUBE User Manual ...
