POWERCUBE User Manual
18
Case 2: If the normal power of inverter
is
> 5kW
,
Mechanical installation shown as follows
：
Figure3-4
Table 3-4 Interface Definition
Item
Name
Definition
Interface1
Power cable- negative
waterproof connector
Reserve
Interface 2
Power cable- negative
waterproof connector
The battery DC output negative pole
Interface 3
RJ45 network cable
connector
Reserve
Interface 4
RJ45 network cable
connector
CAN/RS485 communication interface
(Factory default CAN communication mode)
Interface 5
Power cable- positive
waterproof connector
The battery DC output positive pole
Interface 6
Power cable- positive
waterproof connector
Reserve
1.
Fix the Powercube cabinet to the mounting
position and remove the front cover.
Pass the total positive cable and the total
negative cable (Power cable- positive1, Power
cable- positive2 and Power cable-negative1,
Power cable-negative2
) through the
waterproof connector (Interface1,2,5,6)on
the back of the cabinet, and insert the
external CAN cable(Communication cable-to
inverter2
) into the RJ45 network cable
connector(Interface 4).
1 2 3 4 5 6
Summary of Contents for POWERCUBE Series
Page 1: ...POWERCUBE User Manual ...
