manualshive.com logo in svg

DynaVox EyeMax, User Manual

Share
Download
DynaVox EyeMax User Manual Download Page 11

EyeMax User’s Guide

7

Part # 401216-C

Chapter 2: Hardware Overview

Left Side

The left side of the EyeMax contains a variety of connector ports that you can use to connect it 
to your Maestro/Vmax. It also contains power and charging indicators. Refer to the picture 
below:

E

YE

M

AX

 - L

EFT

 S

IDE

 (

ATTACHED

 

TO

 V

MAX

)

•

Power  Out  Port:

 This port connects to the charger port of the Maestro/Vmax. It supplies 

power to the Maestro/Vmax when both batteries are being charged.

•

USB Port:

 This port connects to one of the USB ports on your Maestro/Vmax.

•

Charger  Port:

 This port connects to the charger that was shipped with your EyeMax.

•

Power Indicator:

 This green LED will light up when the EyeMax is powered on.

•

Charging Indicator:

 This amber LED will light up when you are charging the batteries of 

the EyeMax and Maestro/Vmax. When both batteries are fully charged, the LED will go 
out.

N

OTE

If the charging indicator LED blinks, that means that the EyeMax battery is low, and should be 

charged immediately. Refer to 

Charging the Batteries

 on page 16 for step-by-step instructions.

Charger Port

Power Out Port

USB Port

Power Indicator

Charging Indicator

Summary of Contents for EyeMax











































































Reviews:

No comments

Brands by name

Popular brands

Load more brands