manualshive.com logo in svg

Dynatronics dynatron solaris 705 plus, Service Manual

Share
Download
Dynatronics dynatron solaris 705 plus Service Manual Download Page 19

dynaTron solarIs® Plus PhysICal feaTures

DYNATRON SOLARIS

®

 PLUS SERIES  |  SERVICE MANUAL REV. 6   |  AUGUST 29, 2017

11

9.  TREATMENT WINDOW TOGGLE KEYS:  TOGGLE KEYS are located below the five TREATMENT WINDOWS. 

Pressing the Toggle Key directly below a window allows one to choose an output channel, and select treatment 
parameters for the treatment in focus. A treatment is in focus when the name of the treatment appears in the center 
of the TREATMENT DISPLAY SCREEN and the name of the modality is highlighted green in the channels window.

10.  CHANNELS WINDOW / CHANGING THE FOCUS TREATMENT

One of five TREATMENT WINDOWS, this window lists the available channels/jacks: 1,2,3,4, HV (High Volt, Probe 
(MultiStim), Sound, LT Pad or LT PD1(2) indicates Light Pad, and LT Probe or LT PB1(2) Light Probe. Some 
treatment jacks do not appear in the CHANNELS window until the accessory device is inserted into the Solaris Plus 
console, for example Light Probe, Light Pad, ThermoStim, and Sound.

The Channel Number/Indicator lights in the CHANNELS window identify which output channels/jacks are 
currently in use. The channel(s)/jack illuminated in GREEN indicates the focus treatment and the time, intensity, 
and other treatment parameters for that active treatment appear on the Treatment Display Screen. A Channel/
Indicator illuminated in YELLOW identifies a channel/treatment is in use and delivering current, but is not in 
focus. The intensity, and treatment parameters are not displayed at this time (only one channel’s parameters may 
be displayed at a time). A treatment’s parameters may only be modified when the treatment is brought into focus. 
To bring a treatment into focus, press the CHANNELS TOGGLE key below the CHANNELS window to select a 
channel to be brought into focus. When the channel is in focus, the name will be illuminated GREEN. If a treatment 
that is active but not the focus treatment times-out, the text in the CHANNELS window will change from YELLOW 
to WHITE.  A channel running in the background will change from YELLOW to ORANGE when the stim output is 
in “rest” mode (Russian or Biphasic).

11.  TARGET PAD:  The Solaris Plus TARGET feature is engineered to precisely pinpoint a patient’s pain.  As the finger 

is glided across the TARGET touchpad, the patient identifies the point of greatest pain.  When the TARGET point is 
identified, the finger is lifted from the Target Pad and the selected TARGET is locked in place. TARGET is available 
with Interferential or any four pad stim treatment.

Summary of Contents for dynatron solaris 705 plus































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands