36
F80W
5
Specification of operating fluids
5�5
Liquid gas
The machine is equipped with a gas heating system that uses
liquid gas as fuel.
• Propane-butane (LPG)
Propane-butane (LPG) is an extremely flammable substance
and any leakage causes a high risk of fire or explosion!
Propane-butane (LPG) is heavier than air and may accumu-
late in lower places – danger of fire or explosion!
Gas inhalation may cause headache, weakness, confusion,
dizziness and nausea� It causes frostbites in the liquid state
in contact with skin!
Avoid contact with skin� Wear suitable protective clothing!
Wear protective gloves resistant to oil substances comply-
ing with EN374!
Wear safety goggles!
In case of excess of vapour concentration limits in air, use
a suitable breathing mask� Recommended: organic fume
and vapour filter (type A, AX)!
No smoking at work�
Provide adequate area ventilation!
Always require a material safety data sheet to the delivered
gas bottle� Before mounting the gas bottle on the machine,
read and check that the gas bottle meets all conditions for
putting the machine into operation�
The machine must be equipped with a fire extinguisher�
Have the fire extinguisher ready on the driver's stand at
a place intended for this purpose�
When the machine is operated in underground garages or
other underground areas, observe the national safety regu-
lations regarding space ventilation�
Stop the gas leakage�
In case of gas leakage, inform relevant national authori-
ties�
5�6
Lubricating grease
0787
To lubricate the machine you must use a plastic grease contain-
ing lithium according to:
ISO 6743/9 CCEB 2
DIN 51 502 KP2K-30
Summary of Contents for Hatz F80W
