35
F80W
WORKSHOP MANUAL
5�2 Fuel
Diesel oil is used as fuel for the engine:
• EN 590
• BS 2869 A1 / A2
• ASTM D 975-09a 1-D S15 / 2-D S15
At ambient temperatures below 0°C (32°F), use winter diesel
fuel.
Mixing diesel with special additives is forbidden.
Mixing diesel with petrol is forbidden.
At ambient temperatures below 0°C (32°F), use winter diesel
fuel.
Mixing diesel with special additives is forbidden.
Mixing diesel with petrol is forbidden.
5�3
Hydraulic oil
2158
For the hydraulic system of the machine, it is necessary to use
only high-quality hydraulic oil grades according to ISO 6743/HV
(equal to DIN 51524 part 3 HVLP).
Fill the Machines normally with hydraulic oil that has cinematic
viscosity of 46 mm
2
/s at 40°C (104°F) ISO VG 46. This oil is the
most suitable for use in the widest range of ambient tempera-
tures.
Synthetic hydraulic oil
The hydraulic system can be filled with synthetic oil, which if
leakages occur will be degraded completely by micro-organ-
isms present in water and soil.
Always consult with the oil manufacturer or dealer any
switching from mineral oil to synthetic or mixing oils of
various brands!
5�4
Anti-adherent solution
AMN411
The anti-adhesive liquid is a non-adhesive additive.
It serves for cleaning the hopper, conveyor, augers and parts of
the machine which are in contact with the paved asphalt mate-
rial.
Use an environmentally-friendly anti-adherent solution accord-
ing to the applicable national regulations.
To create the anti-adherent solution, mix a non-sticking agent
with water according to the instructions of the non-sticking
agent manufacturer.
Dosage
The anti-adherent solution dosage may vary depending on the
operating conditions:
For standard mixtures, 1 part of anti-adherent solution in 30
parts of water. (1:30)
For modified mixtures, 1 part of anti adherent solution in 5 parts
of water. (1:5)
Note
There is no vessel for an anti-adherent solution on the machine.
To apply the anti-adherent solution on individual parts of the
machine, use a hand pump for spraying liquids.
It is prohibited to use diesel oil instead of an anti-adher-
ent solution�
Summary of Contents for Hatz F80W
